Login  | |
|
RE: Unnofficial FGI Trade Show relaunched - 11/22/11 7:12:30 PM
|
|
|
maugust789
Posts: 1270
Joined: 03/22/07
From: Chesterfield, MO
Status: offline
|
Stuff I would be willing to trade since it's not selling.
I don't really need anything but you never know. I wouldn't mind having a driver head that i could exchange shafts on like a Nickent 4DX (8.5* to 9.5*). Maybe a 4 wood or balls
NEW - FUJI ZCOM - TW64 - Stiff - T-34 - 48" version No tip prep
NEW - FUJI ZCOM - TW74 - Stiff - T-29 - 48" version No tip prep
NEW - FUJI - Speeder 661 - Triax Engine - T/M - X flex - 46" Tour-Spec 70gram 3.4 mid/mid-high
NEW - RAPPORT ProJec R TW6535S - 46"
Pulls
Mizuno steel hybrid shaft - CLK SL- S300 with Sharpo grip
Mizuno - S300 - 3 iron shaft - actual shipping plus
Rifle Tour Flighted 5.5 iron taper tip 4-PW (-1/4") - Tacki Mac grips - less than 10 rounds on the grips
< Message edited by maugust789 -- 11/23/11 4:46:12 PM >
|
|
|
|
|
RE: Unnofficial FGI Trade Show relaunched - 11/24/11 5:53:11 AM
|
|
|
graz
Posts: 2765
Joined: 10/27/08
From: Ireland
Status: offline
|
quote:
ORIGINAL: graz
I'll throw these out there:
Ashton X1 12.5 driver head, excellent shape, incl headcover
White Lightning 9.5 driver head, decent shape, some browning around the hosel. Just picked this up recently from coach. No headcover
Ashton now gone.
White Lightning left if anyone is looking to try a cult classic? 9.5 degree is too low for me unfortunately.
|
|
|
|
|
RE: Unnofficial FGI Trade Show relaunched - 11/28/11 6:25:31 PM
|
|
|
cnpeters1
Posts: 276
Joined: 03/08/10
Status: offline
|
I've beat this drum here a lot, I know, and sorry if it seems like overkill - but still have a set of ping g10 in r flex, 6-pw, with a 5 and aw added later so not matching serial. They are all yellow dot.
I also have a ping g2hl 4i in green dot to make a nifty matching set.
They're on dghl r300, I have original shafts too.
Looking or wishon 770/870 head set in great shape
|
|
|
|
|
RE: Unnofficial FGI Trade Show relaunched - 11/29/11 9:04:09 PM
|
|
|
glebert
Posts: 1131
Joined: 12/03/07
From: Portland OR
Status: online
|
quote:
ORIGINAL: glebert
Here's some stuff I am looking to trade:
Ping Isoforce Darby F putter 35" putter in good shape, grip is pretty worn. Will include generic "USA" headcover
Dynalite Gold S300 taper tip pulls (3-PW) shaft bands and Ram rubber wrap grips in pretty good shape
Maltby KE4 10.5* Beta Ti driver on KE4 stiff shaft. I think it is 45". There is a slight dent on the heel, doesn't seem to affect performance. Very nice shape otherwise
Maltby Trouble Out 5w (17*, so more like a 4w) on Maltby KE4 FW stiff shaft, good condition
Mitsubishi Javln FX V6 stiff .335 new
Grafalloy Prolaunch Platinum stiff .335 new
UST Proforce (original) stiff .335 new
Royal Precision Saber HL stiff .335 new
Trade interests:
High loft driver, head or shafted with stiff flex
Taper tip shafts, at least 4-PW, stiff
Graphite iron shafts, at least 4-PW, stiff
Wrap grips
Add to the list three 3 woods:
Snake Eyes 600T on Aldila NV 65R. Very nice shape expect couple chips on back edge 43"
KZG Maraging Power on Fujikura Vista Pro 70 R (shaft was SST pured) Scome scuffing on crown 42.5"
Sonartec 3.5 SS on Fujikura Speeder 757 S. Some bad sky marks on tiopline and smaller chips and scratches. 43"
_____________________________
"You can foment revolution or you can cure your slice - life is too short for both" David Owen
|
|
|
|
|
RE: Unnofficial FGI Trade Show relaunched - 04/26/12 4:19:06 AM
|
|
|
yaffldaffl
Posts: 219
Joined: 03/12/10
Status: online
|
Revised list of stuff (some for possible trade, some for sale and will be posted in the pieces and parts section in the next week or os)
1. Integra SV2 head, 10.5* (no head cover)
2. Sand Blaster wedge head, 52*
3. Maltby Hybrid ST iron heads (4-PW)
4. Alpha Pro RX iron heads (3-PW, SW)
5. Fuji E360, R Flex (pull from 44 1/2" driver)
6. SK Fiber TT80, R Flex (to be pulled from a 3 wood)
7. Aldila NVS 85, R Flex (0.335, new)
8. Pinfire Patriot Putter (with headcover)
The two iron head sets, I am in no real rush to move. They are not shafted and haven't decided whether they need to go or stay (perhaps a good trade offer will convince me). The stuff for sale will be posted in the "Pieces and Parts" section once i get pictures of everything. Maybe a couple of other things to add. Try to get down to 2 bags (maybe 3).
|
|
|
|
|
Support our Sponsors:
MyClubMaker.com - Shop everyone then shop us. We guarantee we will meet or beat any price.
My Ostrich Golf - When it comes to golf, we don't have our heads in the sand!
ActiveGolf.com - Book tee times online at top courses around the country.
Value Golf - Selling you components at rock bottom prices.
Solid Rock Golf - Building your game on a solid foundation.
Infiniti Golf - The best fit for your game.
|
Printable Version
Facebook 
Twitter